Detail introduction:
Main function classification: power receiving cabinet, mother cabinet,capacitor compensation cabinet, dual power switch cabinet, feeder cabinet,control cabinet, etc.
Main components: cabinet, cabinet door, instrument door, bottom plate,laminate, top cover, busbar, electrical components, drawer unit, functionalisolation board, primary insert, adapter, busbar clamp, insulation support,auxiliary materials Wait. This series of products adopts assembly structure andcombination unit. The unit is stacked in a metal-enclosedcabinet isolationroom with drawers, and the protection is not lower than IP40. The basicskeleton is made of C-shaped steel,which is assembled by connecting plates,gussets and bolts, and is opened by E=25mm template. The switchgear is dividedinto three compartments by a grounded metal plate: the front is the functionalunit compartment, the cable compartment is located on the right side of thefront of the cabinet, the width is 400 mm, and the horizontal busbar (mainbusbar) is mounted on the rear of the cabinet. Indoors, vertically arrangedhorizontally, two sets of busbars can be installed in the upper or lower partof the cabinet, respectively, which can be powered separately, or connected inparallel, or as a backup power supply. The main busbar can also be mounted onthe top of the cabinet.
Ventilation holes withstencils are arranged on the upper and lower parts of the cabinet. The heightof each functional unit is 8E=200mm. According to the current, it can occupy400mm, 600mm and other unit heights. When the switch is disconnected, thecompartment door can be opened, and the drawer of the same type has goodinterchangeability. Hanging rings are installed at the top corners of thecabinet for easy lifting.